Easy Guide: Programming 2018 Nissan Rogue Smart Keys
Table of Contents
- Introduction
- Programming the 2018 Nissan Rogue Remote Keys
- Step 1: Turning on the Power
- Step 2: Selecting the Key Type
- Step 3: Entering the Pin Code
- Step 4: Programming the Smart Keys
- Step 5: Erasing and Configuring the Keys
- Step 6: Adding Additional Keys
- Step 7: Completing the Programming Sequence
- Conclusion
🚀 Programming the 2018 Nissan Rogue Remote Keys
In this article, we will guide you through the process of programming remote keys for a 2018 Nissan Rogue. Adding an additional key remote to the sequence of keys can sometimes be challenging, but with the right instructions, it can be a smooth task. So, let's dive in and get started with the programming process.
Step 1: Turning on the Power
The first thing you need to do is turn on the power to the gauge cluster. This is important for communication purposes during the programming process. To do this, you can use an auto pad pro light or any suitable power source.
Step 2: Selecting the Key Type
Since the 2018 Nissan Rogue has a smart key system, you need to select the key type before proceeding with the programming. In this case, we will be using a type 2 key. Pay close attention to this detail, as certain years of the car might not communicate if the key type is not properly selected.
Step 3: Entering the Pin Code
To proceed with the programming, you need to enter the 20-pin code. Make sure you verify and enter the correct code to avoid any issues during the process. It is crucial to pay attention to the last five characters of the BCM part number as this can impact the communication between the key and the ECU.
Step 4: Programming the Smart Keys
Once you have entered the pin code, you can now proceed to program the smart keys. Start by switching off the ignition. Then, turn on the hazard lights as instructed and press "OK." The system will initiate a programming sequence and guide you through the next steps.
Step 5: Erasing and Configuring the Keys
During the programming process, you will be prompted to open and close the door. Follow the instructions carefully. It's important to note that all previously programmed smart keys will be erased during this step. Make sure you have the necessary instructions for configuring the keys correctly.
Step 6: Adding Additional Keys
If you need to program additional keys, you can select "Yes" when prompted. This step allows you to add more keys to the system. Follow the same process as before, taking each new smart key and performing the necessary actions for programming it into the vehicle's system.
Step 7: Completing the Programming Sequence
After programming all the smart keys, it's time to complete the sequence. Switch off the vehicle and use the original programmed smart key to finish the process. The vehicle will chime several times, and the ignition will switch on and off. Finally, the instrument cluster should display "Key Registration Complete," indicating that the programming is done.
Conclusion
Programming remote keys for your 2018 Nissan Rogue can be a straightforward process if you follow the steps carefully. Make sure to pay attention to the details and instructions provided in each step to ensure successful programming. By following this guide, you'll be able to add and configure additional keys without any issues.
🔑 Highlights:
- Step-by-step guide for programming remote keys for a 2018 Nissan Rogue
- Importance of selecting the correct key type and entering the pin code accurately
- Clear instructions on erasing, configuring, and adding extra keys to the system
- Finalizing the programming sequence for successful key registration completion
FAQs
Q: What tools do I need to program the remote keys for a 2018 Nissan Rogue?
A: You will need an auto pad pro light or any suitable power source, the necessary pin code, and the smart keys you want to program.
Q: Can I program additional keys without erasing the already programmed ones?
A: No, during the programming process, all previously programmed smart keys will be erased. You will need to reprogram them along with any additional keys.
Q: What should I do if the remote key does not work after programming?
A: If the remote key does not work after programming, double-check that you have followed the programming steps correctly. Ensure that the key is functioning properly and try the programming process again.
Q: Is it possible to program the remote keys for a 2018 Nissan Rogue without professional help?
A: Yes, you can follow the step-by-step instructions provided in this guide to program the remote keys for a 2018 Nissan Rogue on your own. However, if you encounter any difficulties or require further assistance, it is recommended to seek professional help from a certified locksmith or dealership.
Q: Are there any online resources for obtaining the pin code for my 2018 Nissan Rogue?
A: Yes, certain websites and services provide pin codes for various vehicle models, including the 2018 Nissan Rogue. You can search online for reliable resources that offer pin code retrieval services.
