Easy Setup and Control of Bhyve Hose Faucet Timer with WIFI
Table of Contents:
- Introduction
- Setting up the Orbit Beehive Hose Faucet Timer and Wi-Fi Hub
- Connecting the Hose Faucet Timer to the Hub
- Installing Batteries and Powering Up the Timer
- Creating a New Account
- Pairing the Hub and the Hose Faucet Timer
- Connecting the Hub to Wi-Fi
- Entering Location Information
- Naming the Devices
- Configuring the Hose Faucet Timer
- Setting up a Flow Rate Calibration Test
- Creating a Program for the Hose Faucet Timer
- Manual Control and Editing Programs
- Managing Device Settings
- Enabling Smart Watering
- Adjusting Landscape Variables and Smart Watering Program
- Conclusion
🔍 Setting up the Orbit Beehive Hose Faucet Timer and Wi-Fi Hub
The new Orbit Beehive Hose Faucet Timer and Wi-Fi Hub are designed to make watering your garden more convenient and efficient. In this guide, we will walk you through the step-by-step process of setting up and connecting these devices to your Wi-Fi network. With the help of this guide, you will be able to program and control your hose faucet timer with ease.
Introduction
Watering your garden can be a time-consuming task, especially if you have a large area to cover. The Orbit Beehive Hose Faucet Timer and Wi-Fi Hub provide a solution to this problem by automating the process and allowing you to control the watering schedule from your smartphone or tablet. With features like smart watering and programmable timers, you can ensure that your plants receive the right amount of water at the right time, even when you're not at home.
Setting up the Orbit Beehive Hose Faucet Timer and Wi-Fi Hub
Before we begin, make sure you have the necessary equipment: the Orbit Beehive Hose Faucet Timer, the Wi-Fi Hub, and two double-A batteries. Once you have everything ready, follow the steps below to set up and connect the devices.
1. Installing Batteries and Powering Up the Timer
To start, insert the two double-A batteries into the battery tray of the hose faucet timer. Once the batteries are in place, the timer will power up, and you will see an LED light blinking.
2. Creating a New Account
If you don't have an existing account, you will need to create a new one. Open the app and input your account information. Once done, tap "Accept" to proceed.
3. Pairing the Hub and the Hose Faucet Timer
Next, the app will search for nearby devices based on Bluetooth. It should detect and match your Wi-Fi hub. If there are multiple devices available, select the one that matches yours.
4. Connecting the Hub to Wi-Fi
Once the hub and the timer are paired, the app will prompt you to connect the hub to your Wi-Fi network. Select your network from the list and enter the password if prompted. Once connected, the hub will be able to communicate with the app and the internet.
5. Entering Location Information
To enable smart watering and weather-based features, you need to provide your location information. Enter your postal code and any other relevant details on the app.
6. Naming the Devices
Now it's time to give your devices a name. This will help you identify them easily when managing your watering schedule. Choose names that are descriptive and easy to remember.
7. Configuring the Hose Faucet Timer
With the hub and the timer connected, you can now configure and program the hose faucet timer. Follow the instructions on the app to set up your watering schedule, including start times, run durations, and watering days.
8. Setting up a Flow Rate Calibration Test
The hose faucet timer has a built-in flow meter to measure water flow. To ensure accurate watering, you need to calibrate the flow rate. Connect the timer to your water source, turn on the water, and start the calibration test through the app. After the test is complete, the flow rate will be recorded.
9. Creating a Program for the Hose Faucet Timer
Once the calibration is done, you can create a program for the hose faucet timer. Set the desired start time, run duration, and watering days. You can also adjust the program settings later if needed.
10. Manual Control and Editing Programs
The app allows you to control the hose faucet timer manually by starting or stopping the watering programs. You can also edit the programs to change the run duration, days, or other settings. This gives you flexibility in managing your watering schedule.
11. Managing Device Settings
Within the app, you can access the device settings to view and modify specific configurations. This includes adjusting smart watering restrictions, updating firmware, and managing notifications. Take advantage of these settings to customize your watering experience.
12. Enabling Smart Watering
Smart watering is a feature that optimizes your watering schedule based on various factors such as weather conditions, soil type, and plant type. By enabling smart watering, you allow the system to adjust the watering frequency and duration automatically. This helps conserve water and ensures that your plants receive the right amount of moisture.
13. Adjusting Landscape Variables and Smart Watering Program
To fine-tune the smart watering program, you can adjust the landscape variables within the app. Provide accurate information about your plant type, soil type, sunshade exposure, and other relevant factors. Additionally, you can make adjustments to the smart watering program, such as run time and interval, to better suit your gardening needs.
Conclusion
With the Orbit Beehive Hose Faucet Timer and Wi-Fi Hub, watering your garden has never been easier. By following the steps outlined in this guide, you can set up, connect, and program your hose faucet timer with ease. Enjoy the convenience of smart watering and take control of your garden's hydration. Say goodbye to manual watering and hello to efficient and precise irrigation.
Resources:
