Easy Steps to Change the Belt on Your Dirt Devil Vacuum

Table of Contents

1. Introduction
2. Common Issues with Dirt Devil Vacuums
3. Checking if Your Vacuum Needs a Belt Replacement
4. Understanding Different Belt Types for Dirt Devil Vacuums
5. Where to Buy Replacement Belts for Dirt Devil Vacuums
6. Tools Needed for Changing the Belt
7. Step-by-Step Guide to Changing the Belt on a Dirt Devil Upright Vacuum
   • Removing the Bottom Plate
   • Accessing the Brush Roller and Old Belt
   • Comparing the Old Belt with a New Belt
   • Looping the New Belt around the Motor Shaft
   • Reinstalling the Brush Roller and Aligning the Belt
   • Reattaching the Bottom Plate
8. Testing and Verifying the Fix
9. Maintenance Tips for Prolonging the Life of Your Vacuum Belt
10. Conclusion

🧹 How to Change the Belt on Your Dirt Devil Vacuum

Is your Dirt Devil vacuum not performing as efficiently as it used to? Are you experiencing issues like the brush roller not spinning properly or a burning smell coming from the vacuum? Don't worry, this step-by-step guide will help you fix that. In this article, we will walk you through the process of changing the belt on your Dirt Devil upright vacuum.

🚩 Common Issues with Dirt Devil Vacuums

Before we dive into the belt replacement process, it's important to understand some common issues that may arise with Dirt Devil vacuums. These issues can include:

• Brush roller not spinning properly
• Burning smell coming from the vacuum
• Reduced suction power
• Difficulty maneuvering the vacuum
• Excessive noise during operation

🔍 Checking if Your Vacuum Needs a Belt Replacement

To determine if your vacuum needs a belt replacement, you'll need to check if your model is one that requires replacement belts. Different Dirt Devil vacuums have different setups, so the first step is to locate the information about the type of belt required for your specific model. This information can usually be found on the back of the vacuum, on a sticker near the base, or underneath the vacuum.

🛒 Understanding Different Belt Types for Dirt Devil Vacuums

Dirt Devil vacuums use different types of belts depending on the model. It's essential to ensure you have the correct belt for your specific vacuum. The most common types are the Style 4 and Style 5 belts, but there may be variations for specific models or newer versions. It's recommended to use genuine belts or high-quality replacements to ensure optimal performance.

💡 Where to Buy Replacement Belts for Dirt Devil Vacuums

Replacement belts for Dirt Devil vacuums are widely available both online and in physical stores. You can find them on websites like Amazon, where you'll find a variety of options, including genuine belts and compatible replacements. Be sure to check product descriptions and customer reviews to ensure you are purchasing the correct belt for your specific model.

🛠️ Tools Needed for Changing the Belt

Before you begin the belt replacement process, gather the necessary tools:

• Standard number two Phillips head screwdriver
• Magnetic screw tray (optional but recommended for keeping screws organized)
• Another vacuum or cleaning tool (to remove any debris inside the vacuum)

📝 Step-by-Step Guide to Changing the Belt on a Dirt Devil Upright Vacuum

Follow these steps to change the belt on your Dirt Devil vacuum:

1. Removing the Bottom Plate

• Start by lying the vacuum down on the front side, then press the handle release pedal to flatten the vacuum.
• Use the Phillips head screwdriver to remove the screws holding the bottom plate in place. Keep the screws in a magnetic screw tray for safekeeping.

2. Accessing the Brush Roller and Old Belt

• Once the bottom plate is removed, you'll have access to the brush roller and the old belt.
• Gently pull out the brush roller and unloop the old belt from the roller.

3. Comparing the Old Belt with a New Belt

• Compare the old belt with the new belt to check for any stretching or wear. A stretched-out belt will have reduced tension and may cause performance issues.
• If the old belt appears stretched or worn, it's time to replace it with a new one.

4. Looping the New Belt around the Motor Shaft

• Locate the shiny metal piece called the motor shaft, sticking out from the motor assembly.
• Loop the new belt around the motor shaft, ensuring the writing on the belt is facing outwards.

5. Reinstalling the Brush Roller and Aligning the Belt

• Slide the brush roller back into its position, aligning it with the round groove designated for the belt to ride on.
• Ensure the belt is centered and properly aligned with the motor shaft and the round piece on the brush roller.

6. Reattaching the Bottom Plate

• Place the bottom plate back onto the vacuum and snap it into place using the clips or screws, depending on your specific model.
• Use the Phillips head screwdriver to reattach the screws, making sure not to overtighten them.

🧪 Testing and Verifying the Fix

After completing the belt replacement process, it's essential to test the vacuum to ensure the belt is properly installed and the issues have been resolved. Turn on the vacuum and check if the brush roller is spinning smoothly without any excessive noise or burning smells. Verify that the vacuum's performance has improved, including suction power and maneuverability.

🧹 Maintenance Tips for Prolonging the Life of Your Vacuum Belt

To keep your Dirt Devil vacuum running smoothly and prolong the life of the belt, follow these maintenance tips:

• Regularly check and clean the brush roller, removing any hair or debris that may accumulate.
• Monitor the belt for signs of wear or stretching and replace it every three to six months or as needed.
• Keep the vacuum's filters clean to prevent blockages and maintain optimal performance.
• Avoid vacuuming large objects or materials that can damage the brush roller or belt.

🔚 Conclusion

Changing the belt on your Dirt Devil vacuum is a straightforward process that can greatly improve its performance. By following the steps outlined in this guide and using the appropriate belt for your specific model, you can enjoy efficient and effective cleaning with your Dirt Devil vacuum for months to come.

Resources:

• Amazon