The Ultimate Guide to Installing and Using the Yakima Fresh Track Ski and Snowboard Mount
Table of Contents
- Introduction
- Product Overview
- Installation Process
3.1 Adjusting the Clamps
3.2 Mounting the Fresh Track on Crossbars
3.3 Securing the Clamps
- Using the Fresh Track
4.1 Loading Skis and Snowboards
4.2 Using Ski Lifts for Bindings
- Removing the Fresh Track
- Conclusion
How to Install and Use the Fresh Track Ski and Snowboard Mount
Are you ready to hit the slopes? The Yakima Fresh Track ski and snowboard mount is here to make your winter adventures even more exciting. In this guide, we'll take you through the step-by-step process of installing and using this amazing accessory. From adjusting the clamps to securing your gear, we've got you covered. So, let's dive in and get you ready to carve up the fresh powder!
1. Introduction
Winter sports enthusiasts know that having a reliable ski and snowboard mount is essential when it comes to transporting your gear. The Yakima Fresh Track not only provides a safe and secure way to transport your skis and snowboards but also offers ease of use and versatility. Whether you're a seasoned pro or a beginner, this mount is designed to meet your needs.
2. Product Overview
Before we jump into the installation process, let's take a quick look at what's included in the Yakima Fresh Track ski and snowboard mount package. Inside the box, you'll find:
- Two mounts
- Four clamps
- Two ski lifts
- Two keys
- A security wrench
3. Installation Process
3.1 Adjusting the Clamps
The first step in installing the Fresh Track is adjusting the clamps to fit your vehicle's crossbar type. For Yakima crossbars, set the clamp to the middle position. If you have factory crossbars, you may need to use position one, two, or three, depending on their shape and size. Place the clamp onto the crossbar and determine the best position for secure mounting.
3.2 Mounting the Fresh Track on Crossbars
Once you've adjusted the clamps, it's time to mount the Fresh Track on your crossbars. Start by removing the screws from the tops of all four clamps using the included wrench. Then, position each clamp onto the crossbar and reinstall the screws, tightening them firmly. Ensure that the clamps are facing the front of the vehicle for easy access.
3.3 Securing the Clamps
To secure the clamps onto the crossbars, follow these steps. Open each clamp by loosening the knob on top, allowing the T-bolt to pass through the slot. Hinge the clamp open and place it onto the crossbar. Close the clamp around the crossbar, passing the T-bolt back through the slot. Rotate the T-bolt 90 degrees and fully tighten the knob. Finish by angling each knob at a 45-degree angle for easy access to the security screw.
4. Using the Fresh Track
Now that you have the Fresh Track installed, it's time to load up your skis and snowboards and hit the slopes! Here's how you can make the most out of this ski and snowboard mount:
4.1 Loading Skis and Snowboards
Loading your skis and snowboards onto the Fresh Track is a breeze. Simply press the button to open each mount and slide your gear in. Make sure to load skis with the tips facing the rear and position your bindings between the mounts. For close crossbar spacing, ensure that one of the mounts closes in the middle of the bindings. Once loaded, lock the mounts with your SKS key to keep your gear secure during transport.
4.2 Using Ski Lifts for Bindings
If your bindings are hitting your vehicle's roof, don't worry! The Fresh Track comes with ski lifts that provide the extra clearance you need. To install the ski lifts, open the mount and loosen the screw next to the opening. Then, remove the screw near the hinge and place the ski lift onto the clamp using the additional screw. Tighten it in place and attach each mount onto its lift. Finally, tighten the knob and retighten the screw next to the mount opening for added stability.
5. Removing the Fresh Track
When the skiing and snowboarding adventure is over, removing the Fresh Track is just as simple as installing it. Start by loosening the clamp knobs, allowing the T-bolts to pass through the slots, hinging the clamps open. Lift off the mounts and set them aside for your next winter adventure.
6. Conclusion
Congratulations! You are now equipped with the knowledge to install and use the Yakima Fresh Track ski and snowboard mount. With its easy installation process and user-friendly design, this accessory will enhance your winter sports experience. So, get out there and enjoy the thrill of the mountains with the confidence that your gear is safely secured thanks to the Fresh Track.
Highlights:
- Easy and secure installation process
- Adjustable clamps for different crossbar types
- Ski lifts provide extra clearance for bindings
- Lockable mounts for added security
- Versatile and user-friendly design
FAQ:
Q: Can the Fresh Track accommodate skis and snowboards of different lengths?
A: Yes, the Fresh Track can accommodate skis and snowboards of various lengths. Skis and boards under 170 centimeters require a crossbar spread between 12 and 24 inches, while longer skis and boards need a crossbar spread between 12 and 36 inches.
Q: Can the Fresh Track be used with both Yakima and factory crossbars?
A: Yes, the Fresh Track is compatible with both Yakima crossbars and factory crossbars. For Yakima crossbars, set the clamp to the middle position. For factory crossbars, use position one, two, or three, depending on their shape and size.
Q: How do I ensure the Fresh Track is securely installed?
A: After mounting the Fresh Track onto your crossbars, make sure to tighten all the screws firmly. Check that the knobs are facing the front of the vehicle and tighten each knob's security screw. Verify the stability of the mounts by pushing and pulling them in all directions.
Q: Can I use the Fresh Track for other types of equipment besides skis and snowboards?
A: While the Fresh Track is primarily designed for skis and snowboards, it can also be used to transport other winter sports equipment, such as snowshoes or ski poles. Make sure to secure the equipment properly and adjust the clamps to accommodate their size and shape.
Resources:
