Transform Your Fireplace with a Three-Piece Mantel Line

Table of Contents

1. Introduction
2. Installation Procedure
   • 2.1. Filler Pieces
   • 2.2. Mantel Legs
   • 2.3. Shelf Installation
3. Adjustments and Final Touches
4. Conclusion

How to Install a Three-Piece Mantel Line

Are you looking to enhance the look of your fireplace? Installing a three-piece mantel line can add a touch of elegance to your living space. In this article, we will guide you through the installation process step by step, ensuring that you achieve a flawless finish. So, let's get started and transform your fireplace into a stunning focal point in your home.

1. Introduction

A three-piece mantel line consists of a shelf, mantel legs, and filler pieces. These mantels are crafted using non-combustible materials, making them safe to install near your fireplace. The unique package system ensures a perfect fit around the fireplace, giving it a seamless appearance.

2. Installation Procedure

Installing a three-piece mantel line involves a few simple steps. Let's take a closer look at each of them.

2.1. Filler Pieces

Before beginning the installation, measure the height and width of your fireplace. Our standard series mantels are designed for flush installation, allowing the filler pieces to be brought right to the edge of the firebox opening.

If your fireplace is less than 39 inches wide, you won't need to cut the filler pieces in length. However, you will need to adjust the height. Measure the height and make sure it matches the required dimensions.

To cut the filler pieces, use a grinder rather than a water saw to prevent staining the product. Once cut, pre-drill holes larger than the screws you'll be using to fasten the filler pieces to the wall. Apply silicone to the back of the filler piece and then attach it to the wall, leaving a small gap to accommodate any bows in the wall or the fireplace's return.

Repeat the same process for the other filler pieces, installing them on both sides and finishing with the top.

2.2. Mantel Legs

The mantel legs provide support for the shelf and add an elegant touch to the overall design. Pre-drill a hole in the recessed area at the top of the mantel leg for fastening it to the wall. If required, add a backing plate for additional support.

Apply adhesive on the backside and outer edge of the mantel leg, then install it securely to the wall by screwing it in place.

2.3. Shelf Installation

The shelf is the final piece of the three-piece mantel line. Start by applying small dabs of adhesive on the edge of the shelf, ensuring that it won't squirt out between the shelf and the wall.

Next, apply a small amount of adhesive on the top of the mantel legs. Carefully position the shelf and pre-drill holes lined up with the studs in the wall. Screw the shelf into place and fill any remaining holes with the provided plaster mixture.

3. Adjustments and Final Touches

Once the installation is complete, make any necessary adjustments for a perfect fit. Tape off the inside edge of the fireplace and the mantel leg, then use high-temperature black silicone to seal the gap. This will ensure a secure and aesthetically pleasing finish.

4. Conclusion

Congratulations! You have successfully installed a three-piece mantel line, elevating the look of your fireplace to new heights. Now, sit back, relax, and enjoy the cozy ambiance that your fireplace will provide. Remember, by following the steps outlined in this article, you'll be the envy of your neighbors with a beautifully crafted mantel.