Unlock and Reset Kenwood Stereos: Complete Guide
Table of Contents
- Introduction
- Unlocking the Kenwood Stereo
- 2.1 The Reset Pinhole
- 2.2 Resetting the Kenwood KDC Models
- Resetting the Clock
- Conclusion
Introduction
In this article, we will discuss how to unlock and reset the code on your Kenwood stereo. Whether you own a Kenwood KDC, MP238, KDC 138, or KDC MP208, this method will work for all these models. We will provide step-by-step instructions on unlocking the stereo and resetting the clock.
Unlocking the Kenwood Stereo
2.1 The Reset Pinhole
To unlock the Kenwood stereo, you will first need to locate the reset pinhole or button. Depending on the model, the reset pinhole may be behind the faceplate or in a different location. On some models, you may need to remove the faceplate to access the reset pinhole. Look for a small indentation or a hole on the front panel of your stereo.
2.2 Resetting the Kenwood KDC Models
Once you have located the reset pinhole, you can proceed to reset the stereo. Take a paperclip or a bobby pin with a blunt tip, and insert it into the reset pinhole. Push and hold it for a second. This will perform a factory reset and clear the protect code. The protect code prevents you from using any functions of the stereo. You can now safely use the buttons on the stereo and navigate through different modes.
Resetting the Clock
After resetting the stereo, you will need to reset the clock. Make sure the stereo is in standby mode. To do this, go to the menu button, also known as the boost button. Depending on the model, it may display "Code Set" or "Clock Adjust." Scroll down using the middle button until you see "Clock Adjust" on the screen.
Hold the middle button until the clock starts flashing. Use the side-to-side buttons to set the minutes and the up and down buttons to set the hour. Once you have set the time, press the menu button to save the changes.
Conclusion
In conclusion, unlocking the protect code on your Kenwood stereo is a simple process. By following the steps outlined in this article, you can safely reset the code and use your stereo without any restrictions. Additionally, resetting the clock is also straightforward using the menu button. Enjoy your Kenwood stereo without any hassle!
Highlights
- Unlocking and resetting the protect code on Kenwood stereos is a simple process.
- Locate the reset pinhole or button to perform a factory reset.
- Reset the clock using the menu button.
- Enjoy your Kenwood stereo without any restrictions.
FAQs
Q: Can I use this method for other Kenwood stereo models?
A: Yes, this method works for several Kenwood models, including the KDC, MP238, KDC 138, and KDC MP208.
Q: Will resetting the stereo delete my saved settings?
A: Yes, the factory reset will erase all saved settings and restore the stereo to its default state.
Q: How do I know if the reset pinhole is behind the faceplate?
A: Refer to the manual for your specific model, as the location of the reset pinhole may vary.
Q: Can I set the clock without going into standby mode?
A: Yes, you can set the clock in any mode by accessing the menu button and following the instructions provided.
Q: Where can I find the manual for these Kenwood stereo models?
A: You can find the manual for these Kenwood stereo models in the description of this video or check the manufacturer's website for further assistance.
Resources:
