Fix Sharp TV Not Turning On: Troubleshooting Steps to Try
Table of Contents
- Introduction
- Troubleshooting Steps
- 2.1 Hold Volume Down and Channel Up Buttons
- 2.2 Check Power Outlet
- 2.3 Unplug and Hold Power Button
- 2.4 Examine AC Cord
- 2.5 Blow Out Dust
- 2.6 Heat up the Components
- 2.7 Check Remote Batteries
- Conclusion
Article
Introduction
Having trouble getting your Sharp TV to turn on? If you're seeing a little light next to the Sharp logo that blinks rapidly and then slows down, don't worry. In this guide, we will walk you through a series of troubleshooting steps to help you fix the problem and get your TV up and running again.
Troubleshooting Steps
2.1 Hold Volume Down and Channel Up Buttons
The first step in troubleshooting your Sharp TV is to hold down the volume down button and channel up button simultaneously while the TV is still powered on. Make sure you are holding the correct buttons based on the model of your TV. This will reset the TV and may resolve the issue.
2.2 Check Power Outlet
If the TV still doesn't turn on, unplug it from the wall and try connecting another device, such as a hair dryer or phone, to the same power outlet. If the other device doesn't work either, then the problem lies with the power outlet. Reset the power outlet and try again.
2.3 Unplug and Hold Power Button
If the power outlet is not the issue, unplug the power cord from the TV itself. Hold down the power button for at least 60 seconds or longer. This will discharge any residual power in the TV. Then, plug the TV back in and power it on to see if it resolves the problem.
2.4 Examine AC Cord
Check the AC cord of your Sharp TV. There are two types of cords that Sharp TVs use: non-polarized and polarized. Verify which type your TV uses and inspect the cord for any damage or issues. If you have another cord available, try using it to eliminate the possibility of a faulty cord causing the problem.
2.5 Blow Out Dust
Dust can sometimes cause issues with TV functionality. Unplug the TV, and using cold air from a blow dryer or an air compressor, blow out any dust accumulated around the TV's vents or in the internal components. This can help in removing any debris that may be affecting the functionality of the TV.
2.6 Heat up the Components
If the issue persists, try heating up the TV components. While the TV is still unplugged, set a blow dryer to hot air mode and blow hot air around the TV's vents and internal components for about 7 to 10 minutes. Heating up and cooling down the components can sometimes resolve issues caused by temperature-related factors.
2.7 Check Remote Batteries
If you haven't tried this already, remove the batteries from your remote control. Then, hold down the power button on the TV for 10 to 20 seconds. Reinsert the batteries, ensuring they are good, and try turning on your Sharp TV using the remote. Sometimes, issues with the remote's batteries can prevent the TV from powering on.
Conclusion
By following these troubleshooting steps, you should be able to resolve the issue of your Sharp TV not turning on. However, if the problem persists, it is recommended to seek professional assistance or contact Sharp customer support for further guidance.
FAQ:
Q: Why isn't my Sharp TV turning on?
A: There could be several reasons why your Sharp TV is not turning on. It could be due to a power outlet issue, a faulty AC cord, dust accumulation, or remote control battery issues. Following the troubleshooting steps in this guide can help you identify and resolve the problem.
Q: Can I use a different AC cord?
A: Yes, if your Sharp TV uses a non-polarized or polarized AC cord, you can try using a different cord to check if the issue lies with the cord itself. Make sure to use a cord with the same voltage and verify the type of cord your TV uses before making the switch.
Q: Is it normal for the light next to the Sharp logo to blink?
A: The light blinking next to the Sharp logo indicates that the TV is receiving power. However, if the blinking is inconsistent or followed by the TV not turning on, it could be a sign of an underlying issue that needs to be addressed.
Resources:
